Selling Fluke 196 – We Buy New Used 196 (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke 196 ScopeMeter Handheld Oscilloscopes

Features & Applications:

The Fluke 196/003 ScopeMeter high-performance oscilloscope offers specifications usually found on top-end bench instruments. With up to 100 MHz bandwidth and 1 GS/s real-time sampling and a deep memory of 27,500 points per input, it’s ideal for engineers who need the full capabilities of a high-performance oscilloscope in a handheld, battery-powered instrument.

 

Features:

  • Dual-input – 100 MHz bandwidth
  • Up to 1 GS/s real time sampling per input
  • Digital Persistence for analyzing complex dynamic waveforms like on an analog scope (190)
  • Large, high resolution color or monochrome screen
  • Connect and view automatic triggering and a full range of manual trigger modes
  • Fast display update rate for seeing dynamic behavior instantaneously
  • Automatic capture and replay of 100 screens
  • 27,500 points per input record length using ScopeRecord mode
  • TrendPlot paperless chart recorder for trend analysis up to 22 days
  • UP to 1000 V independently floating isolated inputs
  • 1000 V CAT II and 600 V CAT III safety certified
  • Five hours rechargeable Ni-MH battery pack

Buying, Selling, Trading Fluke 196

If you’re selling your Fluke 196 please fill out form on the right hand side of page

.

Selling Fluke 196B – We Buy New Used 196B (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke 196B ScopeMeter Handheld Oscilloscopes

Features & Applications:

The Fluke 196/003 ScopeMeter high-performance oscilloscope offers specifications usually found on top-end bench instruments. With up to 100 MHz bandwidth and 1 GS/s real-time sampling and a deep memory of 27,500 points per input, it’s ideal for engineers who need the full capabilities of a high-performance oscilloscope in a handheld, battery-powered instrument.

Features:

  • Dual-input – 100 MHz bandwidth
  • Up to 1 GS/s real time sampling per input
  • Digital Persistence for analyzing complex dynamic waveforms like on an analog scope (190)
  • Large, high resolution color or monochrome screen
  • Connect and view automatic triggering and a full range of manual trigger modes
  • Fast display update rate for seeing dynamic behavior instantaneously
  • Automatic capture and replay of 100 screens
  • 27,500 points per input record length using ScopeRecord mode
  • TrendPlot paperless chart recorder for trend analysis up to 22 days
  • UP to 1000 V independently floating isolated inputs
  • 1000 V CAT II and 600 V CAT III safety certified
  • Five hours rechargeable Ni-MH battery pack

 

Buying, Selling, Trading Fluke 196B

If you’re selling your Fluke 196B please fill out form on the right hand side of page

.

Selling Fluke 199 – We Buy New Used 199 (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke 199 ScopeMeter 200 MHz Oscilloscopes

ScopeMeter® 190 Series : All this power in your hand!

The ScopeMeter 190 Series has specifications you typically only find on high-end bench oscilloscopes. They offer up to 200 MHz bandwidth for capturing high frequency signals, as found in today’s state-of-the-art electronics, 2.5 GS/s real-time sampling and advanced memory and triggering functions. They’re rugged, compact and battery powered.

 

General Features:

  • Dual-input – 200, 100 or 60 MHz bandwidth
  • Up to 2.5 GS/s real-time sampling per input
  • Choice between a high resolution Color display (190C Series) or Black & White display (190B Series)
  • High waveform resolution of 3,000 datapoints per channel (NEW)
  • Connect-and-View™ automatic triggering and a full range of manual trigger modes
  • Frequency Spectrum Analysis using FFT (190C) (NEW)
  • Digital Persistence for analyzing complex dynamic waveforms like on an analog scope
  • Fast display update rate for seeing dynamic behavior instantaneously
  • Automatic capture and replay of 100 screens
  • 27,500 points per input record length using ScopeRecord™ mode
  • TrendPlot™ paperless chart recorder for trend analysis up to 22 days
  • Up to 1000 V independently floating isolated inputs
  • Waveform reference for visual comparisons and automatic pass/fail testing of waveforms
  • Vpwm function for motor drive and frequency inverter applications.
  • 1000 V CAT II and 600 V CAT III safety certified
  • Four hours rechargeable Ni-MH battery pack

See what’s really happening

High sampling rate gives you the required resolution for detailed signal analysis

With a maximum real-time sampling rate of 2.5 GS/s per input, you can see what really happens, with 400 ps resolution. Both inputs have their own digitizer, so you can simultaneously acquire two waveforms and analyze them with the highest resolution and detail. If an anomaly flashes by on the screen, just press the Replay button to see it again. And thanks to the wider screen, you will always see a 12 divisions time-window – giving a far better overview of what’s happening both before and after the trigger event!
Deeper waveform acquisition memory (NEW)

Thanks to the deeper memory, very small parts of the waveform can be studied in full detail using ‘zoom’.

The waveform memory of all oscilloscopes in both the 190B and 190C Series has been enlarged to allow as many as 3000 samples per channel to be acquired. This is 1800 samples more than before, giving much greater waveform resolution. You can use the ZOOM function to find tiny details in a long waveform, for example, the color burst in a video signal or a single impulse in a complex data-stream. All models also allow the high-resolution waveforms to be transferred to a PC for later detailed analysis using FlukeView ScopeMeter software.
Easier identification of traces, everywhere

Color traces and the high contrast display make signal identification easy

The full-color display makes identification of individual waveforms easier, particularly when displaying large amplitude or multiple overlapping waveforms on screen. On-screen color labels, measurements and warnings are clearly linked to specific waveforms. The bright, high contrast display allows for clear reading under varying light conditions. And still a 4 hour battery operation time is assured!
See dynamic signal behavior instantaneously

Digital persistence mode gives analog scope like display of complex and modulated signals

The Digital Persistence uses multiple intensity levels and user selectable decay time -it’s as if you’re looking at the display of an analog, real time oscilloscope! The fast display update rate that’s a standard on all models reveals signal changes instantaneously, useful for instance when making adjustments to a system under test.
Advanced trigger modes

Pulse width triggering allows you to find anomalies like missing pulses

A wide choice of automatic and manual trigger modes gives you the flexibility to capture just about any signal you’ll encounter. Connect-and-View™ triggering is ideal for fast and easy checking of multiple test-points. The manual modes include time delay, video and pulse-width triggering. A fully isolated external trigger input is included for troubleshooting time relationships between two input signals synchronized to a third signal.
(NEW)

Dual-slope triggering used to capture the eyepattern on a digital datastream.

Two new modes – ‘n-cycle triggering’ and ‘dual-slope triggering’ – have been added to the Fluke 190C Series to help you isolate the phenomena of interest. N-cycle triggering ensures you get a stable ‘live’ image of a signal, for example, in frequency dividers and clocked (synchronous) digital systems, or to synchronize on bursts of pulses. Dual-slope triggering enables the oscilloscopes to trigger on both rising and falling edges alike. This means that any edge in the signal will act as trigger event and initiate a new waveform acquisition, a most useful capability when making eye-patterns from digital data-streams, or in conjunction with single-shot phenomena.
Automatic capture and replay of 100 screens

Scope users know how frustrating it is to see a one-time anomaly flash by, never to be seen again. Not with the ScopeMeter 190 Series! Now you can look back in time with a touch of the replay button. In normal use, the instrument continuously memorizes the last 100 screens. Each time a new screen is acquired, the oldest is discarded. At any moment you can “freeze” the last 100 screens and scroll through picture-by-picture or replay as a ‘live’ animation. Cursors can be used for further analysis. Or you can use the advanced trigger capabilities to capture up to 100 specific events. Two sets of 100 captured screens with individual time stamps can be stored for later recall or download to a PC.
Deep memory for high-resolution ScopeRecord™

Use the 27,500 points memory of the ScopeRecord mode and zoom in for maximum detail

The ScopeRecord memory stores 27,500 points per input or more, for high resolution recording of events up to 48 hours, and captures fast intermit-tents and glitches as short as 50 ns. This continuous roll mode stores, for example, events like motion profiles, UPS-, power supply- and motor start-ups. All models also have a ‘Stop-on-Trigger’ in the ScopeRecord mode. This allows the ScopeMeter to store waveform data until the instrument is triggered or until a repetitive trigger signal is interrupted. This way, the instrument will, for example, automatically recognize a power failure and store the waveform data preceding it. And with 100 x zoom, you can look at the smallest details, like individual power cycles. Two of these 27,500 point recordings can be stored for later analysis.
Measure from mV to kV – fully isolated and safely!

Use Vpwm and measure effective voltage on motor drive and frequency inverter outputs

The ScopeMeter 190 Series have three independently floating isolated inputs. While conventional oscilloscopes can only make measurements referenced to the line power ground, measurements on each of the Fluke ScopeMeter 190 Series inputs can be referenced to a different “low” level. This enables measurements in mixed circuits having different ground references, and also eliminates the risk of accidental ground short circuits. All inputs are safety certified for measurements in 1000 V CAT II and 600 V CAT III environments. And the standard probes cover a wide application range from mV to kV, making the ScopeMeter 190 Series ideal for micro-electronics to electrical power applications.
Analysis power

A wide variety of measurements can be made on either Channel A or B

For analysis of waveforms, ScopeRecord and TrendPlot recordings, the ScopeMeter 190 Series feature 30 automatic measurements, plus cursors, zoom and a real-time clock. The analysis can be made directly or later when back in the office. Up to 2 recordings and 10 scope screens can be stored for analysis, print-out or download to a PC.
Frequency Spectrum Analysis (NEW)

Frequency Spectrum shows an overview of frequencies contained in a signal.

All 190C Color ScopeMeters now include Frequency Spectrum Analysis functionality based on Fast Fourier Transformation (FFT) analysis as a standard feature. This makes it possible for you to identify the individual frequency components contained in a signal. The spectrum analysis function is also handy to reveal the effects of vibration, signal interference or crosstalk. An automatic window function assures optimal windowing, although you may manually select your preferred time window.
Waveform Pass / Fail Testing

Pass/Fail testing of actual signal against a reference template

‘Waveform reference’ allows an acquired trace to be stored and designated ‘reference trace’ for visual comparisons, or it can be used as the reference for automatic ‘Pass / Fail’ testing (190C). Up to 100 individually matching (‘Pass’) or non-matching (‘Fail’) waveforms can be stored in the replay memory, allowing you to monitor your system’s behavior over a long period of time, without the need for you to attend!
Cursor-limited automatic measurement (NEW)

The rms-value of the noise is measured on the part of the waveform enclosed by the cursors.

Automatic power and Vrms-measurements can now be performed on a specific, user identified portion of the waveform using the cursors of the Fluke 190C to define the time-window of interest. In this way, the Color ScopeMeter can measure the power within a specified time span, or the rms-value of a voltage during a dedicated period of time.
… and there is more

  • Variable gain on channel A helps you compare signals on the two inputs. All inputs are safety certified for measurements in 1000 V CAT II and 600 V
  • The Vpwm measurement is for measuring the effective RMS output voltage of variable speed motor drives and frequency inverters.
  • Medical applications: For use on Medical Imaging Equipment and on High-Resolution Video systems, an optional instrument configuration is available for the Fluke 190 Series that supports measurement of

 

Buying, Selling, Trading Fluke 199


Use TrendPlot™ to help find intermittents, fast

Cursors and zoom help you analyze the captured TrendPlot

The toughest faults to find are those that happen only once in a while: intermittents. They can be caused by bad connections, dust, dirt, corrosion or simply broken wiring or connectors. You may not be around to see it – your Fluke ScopeMeter will. In this “paperless recorder” mode, you can plot the minimum and maximum peak values and average over time – up to 22 days. The two inputs can plot any combination of voltage, current, temperature, frequency and phase – with time and date stamp -to help lead you to the cause of those faults quickly.
FlukeView® Software for documenting, archiving and analysis FlukeView® for Windows® helps you get more out of your ScopeMeter by:

  • Documenting – transfer waveforms, screens and measurement data from the ScopeMeter to a PC. Print or import the data into your report
  • Add user text to individual ScopeMeter settings – providing guidance to the operator when recalling a set-up.
  • Archiving – create a library of waveforms with your comments for easy reference and comparison. Store complete Replay cycles for analysis of waveform changes. Store complete memory content of the Scop
  • Waveform Compare – store reference waveforms on the PC, or send a reference back to the ScopeMeter for waveform comparison and “Pass/Fail” testing.
  • Analysis – use cursors, perform spectrum analysis or export data to other analysis programs. ScopeMeter test tools are connected to a PC via an optically-isolated RS-232 interface cable.

Specifications

Bandwidth: 200 MHz
Real-time sample rate: 2.5 GS/s
Inputs and digitizers: 2 plus external / DMM input
Independently floating isolated inputs: Up to 1000 V between inputs, references and ground
Timebase range: 5 ns – 2 min/div; 10 ns – 2 min/div (192B)
Input sensitivity: 5 mV-100 V/div
Glitch capture: 50 ns (5 µs/div – 1 min/div)
Scope measurements: Cursor: 7; Automatic: 30
Maximum record length: ScopeRecord mode: 27,500 pts per input; Scope mode: 3,000 pts per input
Memory: Screens: 10; Setups: 10
Display: 144 mm full monochrome LCD with fast update rate

If you’re selling your Fluke 199 please fill out form on the right hand side of page.

Selling Fluke 196C – We Buy New Used 196C (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke 196C ScopeMeter 100MHz Color Oscilloscope

Features & Applications:

The Fluke 196/003 ScopeMeter high-performance oscilloscope offers specifications usually found on top-end bench instruments. With up to 100 MHz bandwidth and 1 GS/s real-time sampling and a deep memory of 27,500 points per input, it’s ideal for engineers who need the full capabilities of a high-performance oscilloscope in a handheld, battery-powered instrument.

Features:

  • Dual-input – 100 MHz bandwidth
  • Up to 1 GS/s real time sampling per input
  • Digital Persistence for analyzing complex dynamic waveforms like on an analog scope (190)
  • Large, high resolution color or monochrome screen
  • Connect and view automatic triggering and a full range of manual trigger modes
  • Fast display update rate for seeing dynamic behavior instantaneously
  • Automatic capture and replay of 100 screens
  • 27,500 points per input record length using ScopeRecord mode
  • TrendPlot paperless chart recorder for trend analysis up to 22 days
  • UP to 1000 V independently floating isolated inputs
  • 1000 V CAT II and 600 V CAT III safety certified
  • Five hours rechargeable Ni-MH battery pack

 

Buying, Selling, Trading Fluke 196C

If you’re selling your Fluke 196C please fill out form on the right hand side of page

 

Selling Fluke 744 & 196 – We Buy New Used 744 & 196 (‘s) Top Dollar Paid!

If you’re looking to Sell 744 & 196 ScopeMeter Doc Process Calibrator

Fluke 744

As more and more process plants begin to take advantage of smart transmitters, the need for a new generation of calibrators has emerged-calibrators that can communicate via industry standard digital protocols. The 744 combines HART communication capability to deliver an integrated communicating calibrator. This rugged, reliable tool is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation.

The 744 does the work of several tools – sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device.
For documentation, the 744 automates calibration procedures and captures your data. And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations.

The 744 is a power multifunction documenting calibrator that lets you download procedures, lists, and instructions created with software-or upload data for printing, archiving, and analysis. The 744 also features a powerful built in HART® interface capable of performing nearly all the day-to-day tasks you now perform with a separate communicator.

Features:

  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Holds up to a full week of downloaded procedures and calibration results.
  • Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
  • Easy to use
  • Bright white dual display. Read both sourced and measured parameters simultaneously.
  • Multi lingual interface
  • Rechargeable NiMH battery for 10 hour uninterrupted use. Includes gas gauge.
  • Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.
  • Delivered with DPC/Track Sample software.
  • Compatible with many Asset Management software packages.

HART Capabilities

The 744 is designed to take on nearly all the day-to-day tasks you now perform with a separate communicator. In fact, it offers the communication capabilities of the 275 HART communicator.

  • Requires no external box or second tool for everyday HART calibration and maintenance.
  • Offers fast HART communication.
  • Supports popular models of HART transmitters, with more devise-specific command support than any other HART field calibrator.
  • Works with multiple masters, burst mode, and multi-drop configurations.
  • Is easy to update as additional instruments are added and new HART versions are released.
  • Interrogate to determine device type, manufacturer, model, tag.
  • Reconfigure the sensor mapping of dual sensor temperature transmitters.
  • Read HART PV function and smart transmitter digital output while measuring analog mA output.
  • Read and write HART configuration functions to make field adjustments to PV range points, damping, and other top-level configuration settings.
  • Re-label smart transmitters by reading and writing to the HART tag field.

The 744 supports the commands contained in HART protocol Version 5.7. With 2 MB of memory, the 744 supports a substantial set of HART instructions:

  • Universal commands provide functions that are implemented in all field devices, for example, read manufacturer and device type, read primary variable (PV), or read current output and percent of span.
  • Common practice commands provide functions that are common to many but not all field devices, for example read multiple variables, set damping time, or perform loop test.
  • Device-specific commands provide functions that are unique to a particular field device, for example sensor trim.



HART Operating Modes Supported

  • Point to Point operation , the most commonly used mode, connects the 744 to a single HART device in a 4-20 mA loop.
  • In Multi-Drop mode , several HART instruments can be bussed together. The 744 searches for each, identifies addresses in use, and allows you to select the instrument for calibration and related operations.
  • In Burst Mode, the HART instrument transmits bursts of data without waiting to be interrogated by a master unit. The 744 can take transmitters out of burst mode during test or calibration, then later restore them to burst mode.



744 V 2.5 Documenting Process Calibrator Software Upgrade
The Fluke 744 Version 2.5 software upgrade includes:

  • Device-specific calibration support for new instruments:
  • Micro Motion 2000, 2000 IS, 9701, 9712 and 9739 coriolis flow transmitters
  • Fuji FCX and FCXA2 pressure and FRC temperature transmitter
  • New features:
  • Support for New Hart Scientific dry blocks: 7103, 9007, 9011, 9023, 9103, 9105, 9107, 9122, 9127, 9132, 9133 and 9150
  • Enhanced dry block delay setting for temperature switch testing
  • Switch test without reset

The upgrade is delivered on a floppy disk. One upgrade disk is required for each calibrator to be upgraded. Download from your PC to your calibrator using the serial cable originally supplied with your Fluke 744 Calibrator. Elapsed time for the process will be about 8 minutes. After the upgrade is complete, your calibrator will indicate “Version 2.5” at start up.

The 2.5 upgrade is available from your regular Fluke dealer or representative as Fluke 744V20. For an available five-pack, ask for Fluke-744V2V.

Pressure Modules

Covers virtually any pressure application including gage, differential, dual (compound), absolute, and vacuum.

  • Display pressure readings in any of 10 different pressure units you specify in the calibrator setup.
  • Rugged urethane molded cases protect the modules from rough handling and harsh conditions.
  • Features internal temperature compensation from 0º to 50º C for full accuracy performance.
  • Includes NIST-traceable calibration certificate.
  • Modules can be calibrated locally, helping to control costs.

Automated Procedures

Allow you to quickly set up powerful, automated calibration procedures for linear transmitters, DP flow transmitters, and one- and two-point limit switches. Simply select the appropriate measure and/or source functions and fill out the procedure template. The 740 Series does the rest. It quickly performs the test, calculates the errors, and displays the final results, highlighting out of tolerance points.

Custom Units

Enable you to map one unit to another, such as mV to ºC or ºF. Allows you to use the Fluke 740 Series with millivolt output accessories such as the Fluke 80T-IR Temperature Probe, and to document tests using non-supported units such as parts per million or revolutions per minute.

User-entered Values

Enables technicians to record calibration results that were sourced and/or measured by other devices such as panel meters or readout-only devices.

Limit Switch Calibration

Procedures perform fast, automated calibration of one and two-point limit switches for voltage, current, temperature, and pressure.

Differential Pressure Flow Instrument Calibration

Routines use a square root function to directly calibrate DP flow instruments.

Additional Features
Multifunctional

Calibrate temperature, pressure, voltage, current, resistance, and frequency. Since it both measures and sources, you can troubleshoot and calibrate all with one rugged tool.

Powerful, yet easy to use

The easy-to-follow menu-driven display guides you through any task. Get up to speed in minutes, not days. Programmable calibration routines enable you to create and run automated as-found/as-left procedures to ensure fast, consistent, calibrations.

Records and documents results

To support your ISO-9000 or regulatory standards the Fluke 744 captures your calibration results, eliminating the need to juggle a pen and pad in the field. The RS-232 interface lets you transfer the results to a PC, thus saving the time of having to manually transcribe them when you return to the shop.

Truly hand-held

Small enough to fit easily into a tool bag and to use in tight spaces. Runs an entire shift on a rechargeable NiMH battery pack.

Rugged and reliable

Count on Fluke’s rugged design to deliver top accuracy and reliability in harsh environments. Overmolded urethane case stands up to rough handling in industrial environments.

Bright white display

Lets you read your results in any kind of light.

Soft keys

Provide one-touch access to enhanced functions such as task lists, automated procedures, scaling, min/max, stepping and ramping, and review memory.

Three operating modes

Measure, Source, or simultaneous Measure/Source, – enable technicians to troubleshoot, calibrate, or maintain instrumentation with just one tool.

Multi-lingual interface

Displays instructions in English, French, German, Spanish, and Italian.

Built-in algebraic calculator

With four functions-plus square root-stores, recalls, and performs calculations required for setting up instruments or evaluating data in the field. Use it to set the source function to a calculated value. There’s no need to carry a pencil and paper or a separate calculator.

Programmable measurement delay

Inside automated procedures permits calibrating instruments that respond slowly.

 

Buying, Selling, Trading 744 & 196

 

Fluke 196

Features & Applications:

The Fluke 196/003 ScopeMeter high-performance oscilloscope offers specifications usually found on top-end bench instruments. With up to 100 MHz bandwidth and 1 GS/s real-time sampling and a deep memory of 27,500 points per input, it’s ideal for engineers who need the full capabilities of a high-performance oscilloscope in a handheld, battery-powered instrument.

 

Features:

  • Dual-input – 100 MHz bandwidth
  • Up to 1 GS/s real time sampling per input
  • Digital Persistence for analyzing complex dynamic waveforms like on an analog scope (190)
  • Large, high resolution color or monochrome screen
  • Connect and view automatic triggering and a full range of manual trigger modes
  • Fast display update rate for seeing dynamic behavior instantaneously
  • Automatic capture and replay of 100 screens
  • 27,500 points per input record length using ScopeRecord mode
  • TrendPlot paperless chart recorder for trend analysis up to 22 days
  • UP to 1000 V independently floating isolated inputs
  • 1000 V CAT II and 600 V CAT III safety certified
  • Five hours rechargeable Ni-MH battery pack

 

If you’re selling your 744 & 196 please fill out form on the right hand side of page.

Selling Fluke 196C – We Buy New Used 196C (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke 196C ScopeMeter 100MHz Color Oscilloscope

Features & Applications:

The Fluke 196/003 ScopeMeter high-performance oscilloscope offers specifications usually found on top-end bench instruments. With up to 100 MHz bandwidth and 1 GS/s real-time sampling and a deep memory of 27,500 points per input, it’s ideal for engineers who need the full capabilities of a high-performance oscilloscope in a handheld, battery-powered instrument.

Features:

  • Dual-input – 100 MHz bandwidth
  • Up to 1 GS/s real time sampling per input
  • Digital Persistence for analyzing complex dynamic waveforms like on an analog scope (190)
  • Large, high resolution color or monochrome screen
  • Connect and view automatic triggering and a full range of manual trigger modes
  • Fast display update rate for seeing dynamic behavior instantaneously
  • Automatic capture and replay of 100 screens
  • 27,500 points per input record length using ScopeRecord mode
  • TrendPlot paperless chart recorder for trend analysis up to 22 days
  • UP to 1000 V independently floating isolated inputs
  • 1000 V CAT II and 600 V CAT III safety certified
  • Five hours rechargeable Ni-MH battery pack

Buying, Selling, Trading Fluke 196C

If you’re selling your Fluke 196C please fill out form on the right hand side of page.

 

Selling Fluke 99B – We Buy New Used 99B (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke 99B 100MHz 2CH 5GSa/s Scopemeter

Fluke 99B ScopeMeter

The new ScopeMeter IIB with ultra bright high contrast display uses sophisticated technology to provide 25 MSPS acquisition rate and 100MHz bandwidth.  The Series IIB features random repetitive sampling rates of 5 Gigasamples/sec. Your ScopeMeter test tool combines the capabilities of an easy-to-use digital storage oscilloscope with the versatility of a digital multimeter. When you select a measurement function, the test tool automatically chooses the best setup to analyze and compare complex waveforms, or simply to read voltage levels.

ScopeMeter test tool features include:

  • Digital Storage Oscilloscope.
  • 3 2/3-digit, 5-MHz Digital MultiMeter (DMM).
  • Battery power.
  • Measure menu for quick setup.
  • Continuous Auto Set? function for hands-off signal probing.
  • Large memory for front panel Setups, Waveforms, and Screens.
  • Min Max TrendPlot? function with time stamp for long term recording.
  • Optical to RS-232 interface port, 600V isolation.
  • Instant Information key.

Buying, Selling, Trading Fluke 99B

If you’re selling your Fluke 99B please fill out form on the right hand side of page.

Selling Fluke 97 – We Buy New Used 97 (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke 97 ScopeMeter 2 Channel ScopeMeter, 50 MHz

The Fluke 97 ScopeMeter® combines the capabilities of a dual-trace, digital storage oscilloscope with the versatility of a digital multimeter. This combination allows you to analyze and compare complex waveforms, read voltage levels, or simply measure resistance.

Buying, Selling, Trading Fluke 97

 

Features:

  • Multimeter:
    • 3-2/3 Digit, 3000 count
  • DC Volts
    • 300 mV, 3 V, 30 V, 300 V ranges
  • AC Volts
    • 300 mV, 3 V, 30 V, 250 V ranges
  • Ohms
    • 300, 3 k, 30 k, 300 k, 3 M, 30 M ohm ranges
  • Frequency
    • 1 Hz to 5 MHz
  • Oscilloscope
    • Deflection factor: 1 mV/div to 100 V/div in a 1-2-5 sequence
    • Bandwidth (-3 dB): >50 MHz with 10:1 probe only
    • Horizontal range: 5 s to 10 ns per division
    • Impedance (channels A, B and Ext. Trigger): 1 M ohm, 25 pF
    • Internal battery power: NiCad Pack 4 hours typical operating time
  • Weight: 4 lb; Size: 60 mm (2.5 in)H x 129 mm (5.5 in)W x 262 mm (11.1 in)D

If you’re selling your Fluke 97 please fill out form on the right hand side of page.

Selling Fluke 96B – We Buy New Used 96B (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke 96B ScopeMeter Series II 60MHz Oscilloscope

Features & Applications:

Modes
The Fluke 96B features three modes of operation. The first is multimeter mode. This displays standard multimeter information, including voltage, amperage and resistance. Multimeter mode is often used for troubleshooting simple electronic circuits. The second available option is oscilloscope mode. In this mode, the Fluke 96B displays a digital waveform. The digital oscilloscope mode is useful for analyzing complex digital circuits. A third mode combines the previous two modes and displays scope and multimeter functions on one screen.

Power
The Fluke 96B comes with a standard internal battery pack, which allows for portable operation. The battery pack contains nickel-cadmium (NiCAD) 4.8 volt power cells and can power the Fluke for up to four hours. The Fluke 96B can also be powered from an external source, using an 8 volt to 20 volt direct current (DC) power supply with a 5 mm plug.

Safety
The Fluke 96B is designed to meet International Electrotechnical Commission (IEC) safety standards and is UL-listed for electrical measurements up to 600 volts. The device features overload protection that stops electrical flow if 300 volts or more are detected. The Fluke also has surge protection that can resist electrical spikes up to four kilovolts.

Display
The display of the Fluke 96B is a digital monochrome screen with a zoom function. This zoom allows users to quickly focus on specific details of the oscilloscope display. The Fluke 96B oscilloscope screen play is capable of displaying data at 2.5 giga-samples per second (GS/s).

SCOPE MODE

  • Continuous Auto Set
    Hands-free signal probing. Continuously follows input
    signals from 15 Hz to 50 MHz and automatically selects the
    proper time base, input range, and trigger level.
  • Min Max Envelope
    Records the waveform excursions with a grey scale
    envelope on both inputs.
  • 40 ns Glitch detect
    Sweep speeds 1 µs per division or slower on INPUT A.
  • Grey-scale display
    Analog-like Grey-scale display.
  • Waveform Average
    Smoothing up to 256 waveforms. 10 samples in Roll mode.

PowerAdvanced METER Functions
Touch Hold®, Change Alert™, Smoothing™, Continuity Beeper. Readouts in % change, % scale or delta-zero.

MIN MAX Trend Plot
Chart recording function to log MIN, MAX, and AVERAGE readings. Displays all 3 readings as graphs with time and date stamp. Automatic vertical scaling and horizontal time compression for recording from 120 seconds to 40 days.

Buying, Selling, Trading Fluke 96B

If you’re selling your Fluke 96B please fill out form on the right hand side of page.