If you’re looking to Sell Tektronix THS3014-TK 100MHz Handheld Oscilloscope

Tektronix THS3014 100MHz Four Channel Oscilloscope
With 4 isolated channels and up to 7 hours of battery life, the lightweight THS3000 Handheld Oscilloscope Series enables you to safely make floating or differential measurements on your bench or in the field. Now you can tackle tough environments with the performance you expect from Tektronix – safely and affordably.

Accurately measure your signals
With up to 100 MHz bandwidth, 4 channels, and 2.5 GS/s maximum sample rate, no other oscilloscope offers as much bandwidth and sample rate in a portable handheld form factor. The THS3014 Handheld Oscilloscope Series has 10,000 points record length per channel, enabling you to capture more signal information at higher sample rates to clearly see signal details. For applications where it is important to measure slow-changing signals over long time periods, the THS3000 Series offers Roll mode that extends the record length to 30,000 points of signal information.

Safely make floating and differential measurements
Making accurate and safe measurements on power electronics, power semiconductors, and other electronics applications can be challenging when the signal reference is floating and not referenced to earth ground. When your signal ranges from low voltage to high voltage (kV) or you must use probing techniques that can potentially create ground loops, the problem is compounded.

To enable floating measurements, the THS3000 Series is architecturally different than most other oscilloscopes. All input channels are fully isolated from the main chassis and from each other. Additionally the power adapter and USB interface are fully isolated to ensure safe measurements and eliminate the risk of unintentional grounding or accidental short circuits. When configured with the proper probes you can be assured you’ll be able to make quick, safe, and accurate measurements.

Fast analysis of your device
The THS3000 Handheld Oscilloscope Series is packed with analysis tools to help you validate your device’s operation and identify issues quickly. With waveform math, you can add, subtract, or multiply any of your signals to investigate instantaneous power or look at gain. Vertical and horizontal cursors allow you to look at a specific point on your waveform for accurate measurements of voltage, current, time, or frequency. With 21 automated measurements, you can make common measurements quickly and accurately. The built-in Fast Fourier Transform (FFT) function allows you to see the frequency spectrum of your signal, revealing signal interference, crosstalk, or switching noise.

Find intermittent faults with TrendPlot™
Intermittent faults can be caused by timing errors, temperature changes, environmental influences, or simply broken wiring or connectors. The TrendPlot™ function helps you find those faults by plotting minimum and maximum measurement values over time. You can select up to 4 measurements and plot any combination of voltages, amps, frequency, time, and phase for any or all four inputs, all with time capture information.

Waveform limit testing
The THS3000 Series can automatically monitor your signals and output Pass or Fail results by judging whether the input waveform is within predefined boundaries. User selections can include testing one or all input channels and automatic recording of Pass or Fail data. Data can easily be reviewed using the Replay mode or stored externally to a USB memory device.

Automatic capture and data logging of 100 display screens
Capturing random or changing signals can often be difficult. The THS3000 Series greatly simplifies any type of waveform data logging by continuously capturing 100 display screens. Each screen capture can include multiple channels and math waveforms, each with its own time stamp. Data capture can also be tailored to specific events by selection of qualified trigger conditions. Playback is quick and easy with the automatic replay of all captured screens or only the screens you select.

Complete solution for power measurements
For performing power measurement on motor drives, power converters/inverters, and power semiconductor devices the THS3000 Series is equipped to handle most common measurements. For basic debugging, the isolated input channels can be used with a variety of voltage and current probes. Each input channel can be configured to match the probe type and attenuation ensuring correct measurements and cursor readings. Four channels allow for easy measurements of three-phase power or simultaneous capture of digital control and power signals.

Measurements on power conversion electronics usually require probes with higher voltage ratings. Tektronix offers a passive probe with insulation systems specifically designed for making floating measurements. The THP0301-X can measure up to 849 Vp-p (300 VRMS). Optional P5122 probes, when coupled with the THS3000 Series, are suitable for making measurements on 1000 VRMS devices in Category II environments, with a maximum float voltage of up to 600 VRMS relative to earth ground.

Intuitive operation
The THS3000 Handheld Oscilloscope Series has a front-panel layout and an intuitive user interface which makes the instrument easy to use, reducing learning time and increasing efficiency. For initial setup or for situations where you’re constantly changing connection points, the THS3000 Series has a single-button Autoset and Autorange feature which can automatically set up the trigger system and adjust vertical and/or horizontal oscilloscope settings.

Easy to use
The bright color display makes it easy for you to see the signals you’re measuring. Each waveform is color coded and designed to correspond to the colors on the input probe connectors, the front-panel channel selector buttons, and the individual probes which are colored at both ends. By matching the colors during setup you’ll be assured you can easily identify your waveforms.

For setup assistance user messages are available in 11 user-selectable languages including English, French, German, Spanish, Portuguese, Italian, Japanese, Simplified and Traditional Chinese, Korean, and Russian.

Buying, Selling, Trading Tektronix THS3014-TK
Features:

• 21 automatic measurements
• Waveform math and FFT spectral analysis
• Volts, time, frequency, watts cursor measurements
• Measurement data logging with TrendPlot™
• Waveform pass/fail limit testing
• Automatic 100 display screens recorder
• 6 in. (153 mm) bright color display
• USB device and host support
• 7 hours of continuous battery operation

Applications:

• Embedded analog and digital design
• Power devices, power electronics, and power supply design
• Automotive and avionics design and maintenance
• Industrial equipment design and installation
• Field test and service

If you’re selling your Tektronix THS3014-TK please fill out form on the right hand side of page.

If you’re looking to Sell Tektronix TDS 784A 4 Channel 1GHz Oscilloscope

Tektronix TDS 784A 4 Channel 1GHz Bandwidth 4 GS/s Oscilloscope

Option 1M -130,000 record length. Extend TDS 784A record length from 50,000 standard to500,000 samples on one channel, 250,000 on two channels, and 130,000 samples on three or four channels.
Option 13 – Adds RS232 Port
Option 1F – 3.5″ Floppy Disk Drive
Option 2F – Adds Extended Waveform Math/FFT

The Tektronix TDS Oscilloscope is a superb tool for acquiring, displaying, and measuring waveforms. Its performance addresses the needs of both benchtop lab and portable applications.

Limit Testing

The TDS Oscilloscope provides limit testing, which can automatically compare each incoming or math waveform against a template waveform. You set an envelope of limits around a waveform and the oscilloscope finds waveforms that fall outside those limits. (See Figure 3–82.) When it finds such a waveform, the oscilloscope can generate a hardcopy, ring a bell, and stop and wait for your input.

Waveform Math

The TDS Oscilloscope provides a means for you to mathematically manipulate your waveforms. For example, you might have a waveform clouded by background noise. You can obtain a cleaner waveform by subtracting the background noise from your original waveform.

Fast Fourier Transforms (FFT)
The Advanced DSP Math capabilities of the TDS Oscilloscope include taking the Fast Fourier Transform (FFT) of a waveform. This section describes FFTs and how to set up the oscilloscope to display and measure FFTs.

The FFT allows you to transform a waveform from a display of its amplitude against time to one that plots the amplitudes of the various discrete frequencies the waveform contains. Further, you can also display the phase shifts of those frequencies. Use FFT math waveforms in the following applications:

• Testing impulse response of filters and systems
• Measuring harmonic content and distortion in systems
• Characterizing the frequency content of DC power supplies
• Analyzing vibration
• Analyzing harmonics in 50 and 60 cycle lines
• Identifying noise sources in digital logic circuits

Buying, Selling, Trading Tektronix TDS 784A
If you’re selling your Tektronix TDS 784A please fill out form on the right hand side of page.

If you’re looking to Sell Tektronix THM560 TekMeter True RMS Oscilloscope

The Tektronix THM560 True RMS Multimeter/Autoranging Scope combines the functions of an autoranging digital multimeter with the ability to display waveforms. The THM560 features a 3.75 digit LCD display with bargraph. The THM560 produces the waveform display with the press of a button. The THM560 measures true rms AC/DC voltage, AC/DC current (with optional current probe), and resistance plus diode test and continuity checking.

Features & Benefits

True RMS Multimeter
Basic and Advanced Oscilloscope Functions: Measure signals up to 5 MHz
Dual-Channel Scope Capability
Work with standard DMM accessories
Applications

Relative Timing Measurements
Power Measurements

Buying, Selling, Trading Tektronix THM560

Characteristics

Multimeter Capabilities

Resolution – 4000 count, 3364 digits

DC Voltage Ranges – 400.0 mV to 850 V

DC Volts Accuracy – ±(0.5% of reading + 5 counts)

True RMS AC Voltage Ranges – 400.0 mV to 600 V

AC Volts Accuracy –

50 to 60 Hz: ±(2% of reading + 5 counts)

500 Hz: ±(3% of reading + 5 counts)

Resistance Ranges – 400.0 ohm to 40.00 Megohm

Resistance Accuracy – ±(0.5% of reading + 2 counts); 40 Megohm ±(2% of reading + 5 counts)

Diode Test Range – 0 to 2 V

Continuity Check – Audible/visible indicators

Modes – Min, Max, Max-Min, Hold, Delta Hold

Oscilloscope Capabilities

Digitizers, Channels – Two

Maximum Sample Rate – 25 MS/s per channel

Bandwidth – DC to 5 MHz

Vertical Sensitivity – 5 mV to 500 V/div

Peak Detect – 40 ns

Record Length – 256 points

Reference Waveforms – 4 waveforms

Setup Storage – 4

Reference Screens – 1

Acquisition Modes – Sample, Spike Detect, Smooth, Roll, Dynamic Display DSP

Trigger Modes – Auto-Level, Auto, Normal, Single Shot

Operation Modes – Autorange, Manual, Single Shot, AC-Line Test

Cursors w/ Readouts – Delta V, Delta T, 1/Delta T

Measurements – Frequency, Period, Max, Min, Pk-Pk, Duty Cycle, RMS Power Factor, THDF

Waveform Math – Add, Subtract

Display Update Rate – Up to 500 waveforms/second

Physical Characteristics

Length: 211 mm (8.3 in.)

Width: 141 mm (5.6 in.)

Depth: 43 mm (1.7 in.)

Net Weight (including Battery): 1 kg

Operating Ambient Temperature – 0 to 50 °C

Display – 256 × 128 dot LCD

Power Source – 6 AA batteries

Battery Life – 4.5 hr typical (alkaline cells)

Safety

CSA, UL 3111, IEC 1010

EMI – CE rated for emissions

Includes:

Tektronix THM560 STD TekMeter TrueRMS Multimeter / Auto Ranging Scope
(2) 1000V Hard Point Test Leads (1 Red – 1 Black)
Hard Copy User Manual
Hard Carrying Case

If you’re selling your Tektronix THM560 please fill out form on the right hand side of page.

If you’re looking to Sell Tektronix THS720P PowerScout Handheld Oscilloscope

The THS720P TekScope IsolatedChannel Oscilloscope/DMM is ideal for electrical/ power electronics applications. The THS720P includes features specifically for electrical/power electronics measurements which allow testing and verifying correct operation of motors, checking transformer efficiency, verifying powersupply performance and measuring the effect of neutral current. These features include harmonic analysis, power measurements and statistics and PWM motor drive triggering. It also contains the powerful features of a modern oscilloscope that enable troubleshooting and verification of complicated electronic control circuits controlling the high-voltage powerelectronics circuitry.

The THS720P shares measurement features with the THS730A, THS720A Oscilloscope/DMMs, which are ideal for electronic applications.

Features & Benefits

100 MHz Bandwidth
500 MS/s Sampling Rates per Channel
Two Channels and Dual Digitizers
External Trigger
33/4 Digit DMM with Datalogger
Roll Mode
Extra Bright Backlit Display
8 ns Glitch Capture
Independently Floating Isolated Oscilloscope and DMM Channels for Safety
Full Floating Measurement Capability up to 600 VRMS
Advanced Trigger – Delay, Pulse and Video (Line Count and Field Select)
21 Automatic Measurements
RS-232 Programmability/ Communications
NiCd Battery and AC Adapter
Deluxe Soft Carrying Case

Applications

Field or Bench Electronic Troubleshooting
Floating (Nongrounded) System Measurements

Buying, Selling, Trading Tektronix THS720P

Oscilloscope Functions

Bandwidth: 100 MHz
Sample Rate (each channel): 500 MS/s
Time/Division Range: 5 ns to 50s/div
Channels: Two
Sensitivity: 5 mV to 50 V/div (to 500 V/div with 10X probe).
Position Range: ±10 div.
DC Gain Accuracy: ±2%.
Vertical Resolution: 8-Bits.
Record Length: 2500 points.
Horizontal Accuracy: ±200 ppm.
Roll Mode: = 0.5 s/div.
Autorange: User-selectable.
Trigger Modes: Auto, Normal.
Trigger Types: Edge, Pulse, Video, External.
Video Trigger Formats and Field Rates: Odd field, even field and line.
Motor Trigger – Triggers on 3- and 5-level pulse-width modulated power signal.
Harmonics – Up to 31st (30 Hz to 450 Hz).
External Trigger Input: 5 MHz TTL compatible.
Waveform Processing: Add, Subtract, Multiply, Calculate Watts = V x I.
Waveform Storage: 10 waveforms.
Acquisition Modes: Sample, Envelope, Average, Peak Detect.
Cursor Measurements: delta Volts, ? Time, 1/? Time (Hz), Degree (phase).
Cursor Types: Horizontal Bars, Vertical Bars, Paired (volts @ time).
Display System: Interpolation: Sin(x)/x. Format: YT and XY. Mode: Vector, Dot, Vector Accumulate, Dot Accumulate.

DMM Specifications

DC Voltage Ranges: 400.0 mV to 880 V.
DC Volts Accuracy: ±(0.5% of reading + 5 counts).
True RMS AC Voltage Ranges: 400.0 mV to 640 V.
Maximum Float Voltage: 600 VRMS CAT II, each channel (probe dependent).
Resolution: 4000 count, 3-3/4 digits.
AC Volts Accuracy: ±(2% of reading + 5 counts).
Resistance Ranges: 400.0 O to 40.00 MO.
Resistance Accuracy: ±(0.5% of reading + 2 counts); 40 MO: ±(2% of reading + 5 counts).
Diode Test Range: 0 to 2 V.
Continuity Check: Audible tone when < 50 O.
Modes: Min, Max, ?, Max-Min, Avg, Hold.
Nonvolatile Storage: 10 DMM screenshots.
External Trigger Input: 5 MHz TTL compatible.
Vertical Zoom Capability: 2X, 5X, 10X.
dB Scale: Selectable, referenced from 1 mV to 10 V.
dBm Scale: Selectable, referenced from 50 O to 600 O.

General Specifications

Setups: 10 front-panel setups.
Safety: UL3111-1, CSA1010.1, EN61010-1, IEC61010.1.
EMC: Meets Directive 89/336/EEC.
Power: NiCd rechargeable battery pack with AC adapter (both included).
Battery Life: Approx. 2 hours from full charge.
Display: Backlit LCD.
Display Resolution: 320 x 240.

Physical Characteristics

Width: 177 mm
Height: 217 mm
Depth: 51 mm
Weight: Net 1.45 kg

If you’re selling your Tektronix THS720P please fill out form on the right hand side of page.

If you’re looking to Sell Tektronix THS720A OSCILLOSCOPE 100MHZ HANDHELD

The Tektronix THS720A oscilloscope is a graph-displaying device – it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.

The Tektronix THS720A oscilloscope’s simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.

The THS720A shares measurement features with the THS730A, THS720P Oscilloscope/DMMs, which are ideal for electronic applications.

Buying, Selling, Trading Tektronix THS720A

Features & Benefits

100 MHz Bandwidth
500 MS/s Sampling Rates per Channel
Two Channels and Dual Digitizers
External Trigger
33/4 Digit DMM with Datalogger
Roll Mode
Extra Bright Backlit Display
8 ns Glitch Capture
Independently Floating Isolated Oscilloscope and DMM Channels for Safety
Full Floating Measurement Capability up to 600 VRMS
Advanced Trigger – Delay, Pulse and Video (Line Count and Field Select)
21 Automatic Measurements
RS-232 Programmability/ Communications
NiCd Battery and AC Adapter

Applications

Field or Bench Electronic Troubleshooting
Floating (Nongrounded) System Measurements

Oscilloscope Functions

Bandwidth: 100 MHz
Sample Rate (each channel): 500 MS/s
Channels: Two
Sensitivity: 5 mV to 50 V/div (to 500 V/div with 10X probe).
Position Range: ±10 div.
DC Gain Accuracy: ±2%.
Vertical Resolution: 8-Bits.
Record Length: 2500 points.
Horizontal Accuracy: ±200 ppm.
Roll Mode: = 0.5 s/div.
Autorange: User-selectable.
Trigger Modes: Auto, Normal.
Trigger Types: Edge, Pulse, Video, External.
Video Trigger Formats and Field Rates: Odd field, even field and line.
External Trigger Input: 5 MHz TTL compatible.
Waveform Processing: Add, Subtract, Multiply, Calculate Watts = V x I.
Waveform Storage: 10 waveforms.
Acquisition Modes: Sample, Envelope, Average, Peak Detect.
Cursor Measurements: delta Volts, ? Time, 1/? Time (Hz), Degree (phase).
Cursor Types: Horizontal Bars, Vertical Bars, Paired (volts @ time).
Display System: Interpolation: Sin(x)/x. Format: YT and XY. Mode: Vector, Dot, Vector Accumulate, Dot Accumulate.

DMM Specifications

DC Voltage Ranges: 400.0 mV to 880 V.
DC Volts Accuracy: ±(0.5% of reading + 5 counts).
True RMS AC Voltage Ranges: 400.0 mV to 640 V.
Maximum Float Voltage: 600 VRMS CAT II, each channel (probe dependent).
Resolution: 4000 count, 3-3/4 digits.
AC Volts Accuracy: ±(2% of reading + 5 counts).
Resistance Ranges: 400.0 O to 40.00 MO.
Resistance Accuracy: ±(0.5% of reading + 2 counts); 40 MO: ±(2% of reading + 5 counts).
Diode Test Range: 0 to 2 V.
Continuity Check: Audible tone when < 50 O.
Modes: Min, Max, ?, Max-Min, Avg, Hold.
Nonvolatile Storage: 10 DMM screenshots.
External Trigger Input: 5 MHz TTL compatible.
Vertical Zoom Capability: 2X, 5X, 10X.
dB Scale: Selectable, referenced from 1 mV to 10 V.
dBm Scale: Selectable, referenced from 50 O to 600 O.

General Specifications
Setups: 10 front-panel setups.
Safety: UL3111-1, CSA1010.1, EN61010-1, IEC61010.1.
EMC: Meets Directive 89/336/EEC.
Power: NiCd rechargeable battery pack with AC adapter (both included).
Battery Life: Approx. 2 hours from full charge.
Display: Backlit LCD.
Display Resolution: 320 x 240.

Physical Characteristics
Width: 177 mm
Height: 217 mm
Depth: 51 mm
Weight: Net 1.45 kg

If you’re selling your Tektronix THS720A please fill out form on the right hand side of page.

If you’re looking to Sell Tektronix THS720STD Oscilloscope 100MHZ HandHeld

IsolatedChannel™ architecture to ensure safety to user and equipment
Comprehensive and advanced triggering including TV, delay and pulse width
Digital Real Time acquisition with 100MHz bandwidth
Rugged, portable Scope/DMM that is shockproof, dust and water sealed
Our lightweight THS700 Series integrates a 100MHz , 500 MS/s, two-channel display-benchtop specifications – with a true RMS DMM in a powerful handheld device to give you an unprecedented combination of power and portability.

Now you can tackle just about any measurement problem: from ATM servicing and automotive repair to industrial automation and ultrasound imaging. You can operate the scope and meter modes simultaneously or independently – on the same or separate signals.

You can also digitize at full bandwidth on both channels simultaneously. Compact and rugged, the THS700 Series rewrites the rules on what a handheld instrument can do.

Buying, Selling, Trading Tektronix THS720STD

SPECIFICATIONS:

Frequency Range/ Bandwith: 100 MHz
Max. Vertical Sensitivity: 50 V/div
Min. Vertical Sensitivity : 5 mV/div
Number of Channels: 2 CH
Record Length: “2,500 pts.”
Sample Rate: 500 MSa/s
Type (D/A): Digital Hand Held
IsolatedChannel™ architecture to ensure safety to user and equipment
Comprehensive and advanced triggering including TV, delay and pulse width
Digital Real Time acquisition with 100MHz bandwidth
Rugged, portable Scope/DMM that is shockproof, dust and water sealed

If you’re selling your Tektronix THS720STD please fill out form on the right hand side of page.

If you’re looking to Sell Tektronix THS710 Oscilloscope, Digital: 60MHz 250M

The Tektronix THS710 oscilloscope is a graph-displaying device – it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.

Buying, Selling, Trading Tektronix THS710

The Tektronix THS710 oscilloscope’s simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.
Performance Characteristics of the THS710
Form Factor Benchtop
Bandwidth 60 MHz
Number of Channels 2 ch
Simultaneous Channels 2 ch
Simultaneous Maximum Sampling Rate/ch 250 MSa/s
One ch. only max. sampling rate 250 MSa/s
Max. Record Length 2500 pt/sec
Min. Vertical Sensitivity 5 mV/div
Maximum Vertical Sensitivity 50 V/div
Rise time 5.83 ns
Number of Bits 8 bits
Main time base – lowest 10 ns/div
Main time base – highest 50 s/div
Minimum Glitch Trigger 8 ns
Display Type LCD
Display modes Dot,Vector
Programmability/Connectivity of the THS710
User Interface Proprietary
Ports to Peripheral Devices RS232
Test Pattern Storage 10 Patterns

If you’re selling your Tektronix THS710 please fill out form on the right hand side of page.