Current post: Selling Tektronix THS720P – We Buy New Used THS720P (‘s) Top Dollar Paid!

Selling Tektronix THS720P – We Buy New Used THS720P (‘s) Top Dollar Paid!

If you’re looking to Sell Tektronix THS720P PowerScout Handheld Oscilloscope

The THS720P TekScope IsolatedChannel Oscilloscope/DMM is ideal for electrical/ power electronics applications. The THS720P includes features specifically for electrical/power electronics measurements which allow testing and verifying correct operation of motors, checking transformer efficiency, verifying powersupply performance and measuring the effect of neutral current. These features include harmonic analysis, power measurements and statistics and PWM motor drive triggering. It also contains the powerful features of a modern oscilloscope that enable troubleshooting and verification of complicated electronic control circuits controlling the high-voltage powerelectronics circuitry.

The THS720P shares measurement features with the THS730A, THS720A Oscilloscope/DMMs, which are ideal for electronic applications.

Features & Benefits

100 MHz Bandwidth
500 MS/s Sampling Rates per Channel
Two Channels and Dual Digitizers
External Trigger
33/4 Digit DMM with Datalogger
Roll Mode
Extra Bright Backlit Display
8 ns Glitch Capture
Independently Floating Isolated Oscilloscope and DMM Channels for Safety
Full Floating Measurement Capability up to 600 VRMS
Advanced Trigger – Delay, Pulse and Video (Line Count and Field Select)
21 Automatic Measurements
RS-232 Programmability/ Communications
NiCd Battery and AC Adapter
Deluxe Soft Carrying Case

Applications

Field or Bench Electronic Troubleshooting
Floating (Nongrounded) System Measurements

Buying, Selling, Trading Tektronix THS720P

Oscilloscope Functions

Bandwidth: 100 MHz
Sample Rate (each channel): 500 MS/s
Time/Division Range: 5 ns to 50s/div
Channels: Two
Sensitivity: 5 mV to 50 V/div (to 500 V/div with 10X probe).
Position Range: ±10 div.
DC Gain Accuracy: ±2%.
Vertical Resolution: 8-Bits.
Record Length: 2500 points.
Horizontal Accuracy: ±200 ppm.
Roll Mode: = 0.5 s/div.
Autorange: User-selectable.
Trigger Modes: Auto, Normal.
Trigger Types: Edge, Pulse, Video, External.
Video Trigger Formats and Field Rates: Odd field, even field and line.
Motor Trigger – Triggers on 3- and 5-level pulse-width modulated power signal.
Harmonics – Up to 31st (30 Hz to 450 Hz).
External Trigger Input: 5 MHz TTL compatible.
Waveform Processing: Add, Subtract, Multiply, Calculate Watts = V x I.
Waveform Storage: 10 waveforms.
Acquisition Modes: Sample, Envelope, Average, Peak Detect.
Cursor Measurements: delta Volts, ? Time, 1/? Time (Hz), Degree (phase).
Cursor Types: Horizontal Bars, Vertical Bars, Paired (volts @ time).
Display System: Interpolation: Sin(x)/x. Format: YT and XY. Mode: Vector, Dot, Vector Accumulate, Dot Accumulate.

DMM Specifications

DC Voltage Ranges: 400.0 mV to 880 V.
DC Volts Accuracy: ±(0.5% of reading + 5 counts).
True RMS AC Voltage Ranges: 400.0 mV to 640 V.
Maximum Float Voltage: 600 VRMS CAT II, each channel (probe dependent).
Resolution: 4000 count, 3-3/4 digits.
AC Volts Accuracy: ±(2% of reading + 5 counts).
Resistance Ranges: 400.0 O to 40.00 MO.
Resistance Accuracy: ±(0.5% of reading + 2 counts); 40 MO: ±(2% of reading + 5 counts).
Diode Test Range: 0 to 2 V.
Continuity Check: Audible tone when < 50 O.
Modes: Min, Max, ?, Max-Min, Avg, Hold.
Nonvolatile Storage: 10 DMM screenshots.
External Trigger Input: 5 MHz TTL compatible.
Vertical Zoom Capability: 2X, 5X, 10X.
dB Scale: Selectable, referenced from 1 mV to 10 V.
dBm Scale: Selectable, referenced from 50 O to 600 O.

General Specifications

Setups: 10 front-panel setups.
Safety: UL3111-1, CSA1010.1, EN61010-1, IEC61010.1.
EMC: Meets Directive 89/336/EEC.
Power: NiCd rechargeable battery pack with AC adapter (both included).
Battery Life: Approx. 2 hours from full charge.
Display: Backlit LCD.
Display Resolution: 320 x 240.

Physical Characteristics

Width: 177 mm
Height: 217 mm
Depth: 51 mm
Weight: Net 1.45 kg

If you’re selling your Tektronix THS720P please fill out form on the right hand side of page.